File:3D-Printed Battery Brace for Tamiya TA-02SW 00.jpg

No higher resolution available.

3D-Printed_Battery_Brace_for_Tamiya_TA-02SW_00.jpg ‎(777 × 492 pixels, file size: 399 KB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	22:05, 23 October 2018		777 × 492 (399 KB)	Heiko (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 7
Exposure time	1/13 sec (0.076923076923077)
F Number	f/1.8
ISO speed rating	100
Date and time of data generation	23:18, 22 October 2018
Lens focal length	3.99 mm
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	Photos 3.0
File change date and time	23:18, 22 October 2018
Exposure Program	Normal program
Exif version	2.21
Date and time of digitizing	23:18, 22 October 2018
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	3.6452095808383
APEX aperture	1.6959937156324
APEX brightness	−0.13975483790679
APEX exposure bias	0
Metering mode	Spot
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	407
DateTimeDigitized subseconds	407
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	28 mm
Scene capture type	Standard
IIM version	2