3D-Printed Battery Brace for Tamiya TA-02SW

From Wurst-Wasser.net
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

If you like this - take a look at this: 3D-Printed Battery Brace for Tamiya TA-02SW (Again)

The Mission

My nVision 2s 4500mAh LiPos won't fit Tamiya TA-02SW chassis, because the battery is too long (the original battery brace can't be attached). Therefore I made my own battery brace.

The Result

3D-Printed Battery Brace for Tamiya TA-02SW 01.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 02.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 03.jpg 3D-Printed Battery Brace for Tamiya TA-02SW 04.jpg

Instructions

Use the second part as a pattern to drill the holes according to your battery, first with a 2.5mm, then a 5mm drill (or use two 2.5mm drills instead :-) ).

The Downloads


Links