Use Raspberry Pi for 3D-Printing: Difference between revisions

From Wurst-Wasser.net
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
=== Prerequisites ===
=== Prerequisites ===
Make sure, you set up your Pi properly, install all updates and connect it the internet<ref>http://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md</ref>
Make sure, you set up your Pi properly, install all updates and connect it the internet<ref>http://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md</ref> by editing <tt>/etc/wpa_supplicant/wpa_supplicant.conf</tt>, <tt>apt-get update</tt>, <tt>apt-get upgrade</tt>


=== Using [[OctoPrint]] ===
=== Using [[OctoPrint]] ===

Revision as of 21:02, 31 March 2015

Prerequisites

Make sure, you set up your Pi properly, install all updates and connect it the internet[1] by editing /etc/wpa_supplicant/wpa_supplicant.conf, apt-get update, apt-get upgrade

Using OctoPrint

I found this regarding OctoPrint:

https://github.com/foosel/OctoPrint/wiki/Setup-on-a-Raspberry-Pi-running-Raspbian


Using Repetier Host

  • Footnotes:
  1. ↑ http://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md
Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=Use_Raspberry_Pi_for_3D-Printing&oldid=5059"