Use Raspberry Pi for 3D-Printing

From Wurst-Wasser.net
Revision as of 14:47, 19 April 2018 by Heiko (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

TOTALLY UNFINISHED AND DISCARDED SINCE I SWITCHED TO Simplify3D!


Prerequisites

Make sure, you set up your Pi properly, install all updates and connect it the internet[1] by editing /etc/wpa_supplicant/wpa_supplicant.conf, apt-get update, apt-get upgrade

Using OctoPrint

I found this regarding OctoPrint:

https://github.com/foosel/OctoPrint/wiki/Setup-on-a-Raspberry-Pi-running-Raspbian


Using Repetier Host

I found http://www.3deee.ch/?p=279 and http://help.printrbot.com/Guide/Installing+Repetier-Host+for+Linux/75

  • Footnotes:
  1. ↑ http://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md
Retrieved from "https://www.wurst-wasser.net//wiki/index.php?title=Use_Raspberry_Pi_for_3D-Printing&oldid=5716"